How To Fix A Bike Pedal That Fell Off?

When it comes to bicycle parts, pedals are one of the common parts of a bike that can detach themselves from the clipless area of your bike. While this does not necessarily that the pedal on your bike is broken but only loose. Either way, it can create problems if something is out of place and makes it hard to pedal. So, how to fix a bike pedal that fell off?

While it can be annoying and disconcerting when your pedal falls off while you are out riding. And in some cases, it can hurt when the pedal comes off while out riding. It can happen for several reasons, like missing or loose pedal screws or a slippery pedal spindle. It usually does not take long to get the right situation but you may need a wrench.

In this post, we will go through how to fix a bike pedal that fell off. Let’s get started!

Read more on common questions asked

Why Does A Bike Pedal Fall Off?

There are a number of reasons this can happen. A bike pedal is annoying to try and put back on when it falls off, but in most cases, it is not hard to fix. There are many reasons why a bike pedal may fall off but in most cases, the pedal has come loose from its crank arm.

This can especially happen if you have an old bike that has not been maintained properly or if you have been riding your bicycle in harsh conditions such as sand or mud.

Here are some common reasons why a bike pedal falls off.

  • Loose Bolts.
  • Poorly Threaded Bolt.
  • Worn-out Crank Arm.
  • Damaged Pedal.

Loose Bolts

This is one of the most common reasons that a bike pedal comes loose is that the bolts are not tight enough. If this happens, you should tighten the bolts with a wrench so that they cannot come loose again while our riding.

Poorly Threaded Bolt

Sometimes, when installing a new pedal on your bike, it may not be threaded correctly and may come loose. This can be fixed by taking out the old bolt and installing a new one properly by yourself or at the bike shop.

Worn-Out Crank Arm

If your crank arm is worn out severely, it may become difficult to keep your pedals attached to them because they will not be securely fastened in the crank arm. To fix this problem, you can either replace the crank arm with another one or buy one online from Amazon.

Damaged Pedal

The threads on the pedal are stripped or damaged. This happens when you are riding over rough terrain or when the pedal is attached to a crank arm that is bent or damaged. The threads can become damaged because they were not properly lubricated, so they strip when you tighten them with a wrench.

The lines on this part can become stripped if you try to pull them with a twist while they are still wet from being cleaned after riding in muddy conditions.

How Much Does It Cost To Fix Bike Pedals?

The cost of fixing bike pedals depends on the type of pedal you need to replace and the extras you may need. The average price for a new set of simple pedals is around $40, with more expensive brands can cost over $100.

Also, the price will also vary depending on what type of material you choose. For example, if you want titanium pedals instead of aluminum ones, they will be more expensive because they are harder to make.

If you also need to replace the crank arm this can be around $20. And if you get a bike shop to do the labor of replacing the pedals, the price range can be $20 to $50.

The cost of repairing a broken pedal varies based on the extent of the damage and whether it is possible to improve or not. If the pedal cannot be fixed, it might be cheaper to buy a new one instead.

How To Fix A Bike Pedal That Fell Off?

If your bike pedal has fallen off, you can usually fix it. The first thing to check is the axle nut. The nut holds the pedal in place and keeps it from coming loose when you ride. It may have come unscrewed if the nut is loose and wiggles.

If this happens, tighten the nut until it’s snug but not overly tight. If your pedals are flexible because they’ve fallen off their axles, you’ll need to replace them if they’re damaged beyond repair or if you’d like to upgrade your bike with new pedals.

You may also want to replace them if they’re worn out, which happens more quickly if you ride on rough terrain or frequently go off-road.

If you have a bent, broken, or missing pedal, you will need to replace it or fix it. Here is how to fix a bike pedal that fell off.

Getting Setup

  • Starting off you need to place your bike on a bike stand as this will make sure that it does not move. You need to verify that it is the correct length should be.
  • Alternatively, if you do not have a bike stand you can flip your bike upside down on its saddle and handlebars. You can put a cloth on the ground to protect the saddle and handlebars.

Replacing The Pedal

  • Remove the damaged pedal from the crank arm using a wrench.
  • Clean out any dirt or debris inside the crank arm and around where the pedal was attached using an old rag and some cleaning solvent.
  • Take a look at the remaining part of your original pedal and see if there is any way that you can use it as part of your new repair job by using screws or welding material such as JB Weld or epoxy cement. If there is no way to reuse your old parts, buy new ones from an online store like Amazon.
  • Attach your new replacement pedal onto your bike crank arm by tightening down on it with a wrench until it is tight.

Finish Up

  • Finally, apply lubricant to the pedal and crank arm. You need to test that everything is working properly. If the testing results are negative, don’t hesitate to repeat the previous steps until you it working properly.
  • Double-check that your pedals are working properly before you go out biking.

How To Take Care Of Bike Pedals?

The cheapest way to protect your pedals is to take care of them. It helps you move forward and backward, so it is important to take care of them. Here are some tips on how to take care of your bike pedals.

  • The first thing that you should do is keep your bike pedals clean. You can use a toothbrush or brush to clean the dirt from around the edges of your pedal. You can also wear cloth, if necessary.
  • When cleaning the actual pedal itself, you need some grease and a rag or paper towel. First, apply some grease to the surface of your pedal, and then wipe away any extra oil with a rag or paper towel. Make sure that there is no excess grease left on your pedal before wiping it off with a clean cloth or paper towel
  • After cleaning your bike pedals properly, make sure you oil them properly too! This will help prevent rusting and other problems from occurring in the future.

Wrapping Up

Finally, it can be annoying and disconcerting when your pedal falls off while you are out riding. And in some cases, it can hurt when the pedal comes off while out riding. It can happen for several reasons, like missing or loose pedal screws or a slippery pedal spindle. It usually does not take long to get the right situation but you may need a wrench.

And that’s it for now! I’d love it if this post on how to fix a bike pedal that fell off was helpful to you. Let me know if you have any questions and let me know if there is more to add.

Did you enjoy this post? Then don’t forget to pin it!

how to fix a bike pedal that fell off